LinkRunner G2 (LR-G2) Netally Network Tester

LinkRunner G2 (LR-G2) Netally Network Tester

The LinkRunner G2 Smart Network Tester simplifies network validation and the configuration of copper and fiber Ethernet networks, streamlining workflows by combining essential functions of installation and triage in a single, ruggedized unit. The LinkRunner G2 features an intuitive design that runs Android-based apps with smartphone-like features. This next-generation tester will help improve the efficiency and effectiveness of network operations by accelerating network deployment and problem identification.

 

More information contact below :

 GET QUOTE 021-4585-0618 0811-1519-949

Description

The LinkRunner G2 Smart Network Tester simplifies network validation and the configuration of copper and fiber Ethernet networks, streamlining workflows by combining essential functions of installation and triage in a single, ruggedized unit. The LinkRunner G2 features an intuitive design that runs Android-based apps with smartphone-like features. This next-generation tester will help improve the efficiency and effectiveness of network operations by accelerating network deployment and problem identification.

Discover Nearest Switch and VLAN

The LinkRunner G2 uses the IEEE Link Layer Discovery Protocol (LLDP), plus the Cisco and Extreme Discovery Protocols (CDP and EDP) to display the VLAN and nearest switch model, slot, and port.

The LinkRunner G2 displays critical nearest switch information include:
– Switch name and model
– Switch chassis, slot, and port #
– Switch IP Address
– VLAN’s supported
– Duplex and speed (actual and advertised)
– Signal strength
– Connection (MDI or MDI/X)
– PoE voltage and power (actual and test limit)

 

TruePower PoE Loaded Test


LinkRunner G2 is the first field tester able to validate loaded PoE performance by drawing actual power up to 802.3bt 90W across all four pairs. Load the circuit to stress switches, cabling, and patch panels, all while measuring the voltage and pairs being used. Using the TruePower test to validate the power delivery before installing IoT connected devices ensures a smooth deployment and helps to alleviate finger-pointing.

 

Packet Reflector

The LinkRunner G2 packet reflector mode can be used as a remote device during end-to-end network path performance tests to validate LAN and WAN throughput capabilities up to 1Gbps.

LinkRunner G2 supports packet reflection for:
– OptiView® XG Network Analysis Tablet
– OneTouch™ AT Network Assistant

VLAN Monitor & Packet Capture
The LinkRunner G2 can monitor and show traffic distribution of the top 9 VLANs and capture 2GB of packets at line-rate.

 

Automated Test Results Management to Link-Live Cloud Service

Serving as a centralized test results and device management system, the complimentary Link-Live cloud service transforms team workflows with the ability to quickly and easily log, document, and report test activity from all LinkSprinter, LinkRunner AT, LinkRunner G2, AirCheck G2, and OneTouch AT hand-held network testers. Once the instrument is connected to the Link-Live Cloud Service, your test results are automatically uploaded to the dashboard for project management and reporting. You have the option of uploading additional files, screenshots, images, profiles, packet captures, location information, and comments anytime. Also, certain NetAlly instruments with AllyCare Support can receive firmware updates “over the network” from Link-Live as they become available.

An API is available to retrieve and integrate data from Link-Live into other management platforms, such as your trouble-ticket application or network management system. This gives you the ability to easily provide proof-of-performance and better manage jobs and staff efficiency.

This unified dashboard of both wired and Wi-Fi network connectivity results enables you to:
– Reduce results management overhead for multiple testers and users
– Enables seamless collaboration between site personnel and remote experts
– Simplify report generation across media types for network deployment documentation
– Attach photos, user comments to each result, adding context for future changes and troubleshooting
– For asset management, ability to associate serial numbers of installed devices, and/or cable/wall jack label to specific test results

 

LinkRunner G2 vs. LinkRunner AT

While the LinkRunner G2 and LinkRunner AT are both network testers that help IT and System Integrators verify and troubleshoot Ethernet access networks, the LinkRunner G2 is a new class of Network Tester, with an Android-based operating system and a smartphone-like user interface.

The LinkRunner G2 includes test features that provide visibility, versatility, and value beyond the LinkRunner AT. Below is a comparison chart between LinkRunner G2 vs. the LinkRunner AT 1000 / 2000.

PRODUCT MODELS

Model Number/NameDescription
LR-G2Includes: (1) LinkRunner G2 with Li-ION battery, power supply with regional power plugs, Wireview wire mapper #1, Inline RJ-45 coupler, USB 2.0 to Micro USB cable, 8 G Micro SD card, small soft case, coupler, and Quick Start Guide.
LR-G2-1YS1 year AllyCare Support for LR-G2
LR-G2-3YS3 year AllyCare Support for LR-G2
LR-G2-KITIncludes: (1) LinkRunner G2 with Li-ION battery, power supply with regional power plugs, Wireview wire mappers #1-#6, Inline RJ-45 coupler, USB 2.0 to Micro USB cable, 8 G Micro SD card, holster, Accessories pouch, IntelliTone™ 200 LAN Probe, medium soft case, coupler, and Quick Start Guide.
LR-G2-KIT-1YS1 year AllyCare Support for LR-G2-KIT
LR-G2-KIT-3YS3 year AllyCare Support for LR-G2-KIT
LR-G2-LS-KITIncludes: (1) LinkRunner G2 with Li-ION battery, power supply with regional power plugs, Wireview wire mapper #1, Inline RJ-45 coupler, USB 2.0 to Micro USB cable, 8 G Micro SD card, small soft case, coupler, Quick Start Guide, (2) LinkSprinters, and (2) LinkSprinter holsters.
LR-G2-LS-KIT-1YS1 year AllyCare Support for LR-G2 and LSPRNTR-300
LR-G2-LS-KIT-3YS3 year AllyCare Support for LR-G2 and LSPRNTR-300
LR-G2-ACKG2-CBOIncludes: (1) LinkRunner G2 with Li-ION battery, (2) Power supplies with regional power plugs, automobile powercharger, Wireview wire mappers #1-#6, Inline RJ-45 coupler, (2) USB 2.0 to Micro USB cable, 8 G Micro SD card, (2) holsters, accessories pouch, IntelliTone™ 200 LAN Probe, soft carrying cases (small, medium, large), (1) AirCheck G2 Wireless Tester, (1) Test Accessory, Quick Start Guides, and external directional antenna.

Accessories

Model Number/NameDescription
US-WIFI-BT-USBEdimax n150 Wi-Fi & Bluetooth USB Adapter for US and Canada
EU-WIFI-BT-USBEdimax n150 Wi-Fi & Bluetooth USB Adapter for Europe
LION-REPL-BAReplacement battery for ACKG2 and LRG2
MS-AUTO-CHGMS-AUTO-CHG, Auto Lighter Adapter Accessory
SFP-1000LXSFP-1000LX, LX Gig Fiber DDM SFP Transceiver
PWR-CHARGERPWR-CHARGER, AC Charger Replacement
SFP-1000SXSFP-1000SX, SX Gig Fiber DDM SFP Transceiver
SFP-1000ZXSFP-1000ZX, ZX Gig Fiber DDM SFP Transceiver
SFP-100FXSFP-100FX, 100BASE-FX Fiber DDM SFP Transceiver
G2-HOLSTERProtective carrying holster with shoulder strap for ACKG2 and LRG2
WIREVIEW 1Wireview wire mapper #1
WIREVIEW 2-6Wireview wire mappers #2-#6
SM SOFT CASESmall soft case
MD SOFT CASEMedium soft case
LG SOFT CASELarge soft case

 

SPECIFICATIONS

General
Dimensions3.8 in x 7.7 in x 1.6 in (9.7 cm x 19.6 cm x 4.1 cm)
Weight18 oz (0.51 kg)
BatteryRechargeable lithium-ion battery pack (3.6 V, 6 Ah, 21 Wh)
Battery LifeTypical operating life is 4 hours. Typical charge time is 7 hours.
Display5.0 in color LCD with capacitive touch screen (480 x 800 pixels)
Keypad1-key elastometric (power only)
Host InterfaceMicro USB On-the-Go port
USB PortUSB 2.0 Type A port
SD Card SlotSupports Micro SD
Cable TestPair length, crossed, reversed and distance to open, short, split
Tone GeneratorDigital tone: [455 KHz]; Analog tones: [400 Hz, 1KHz]
PortsRJ-45 copper port 10/100/1000BASE-T. 100/1000BASE-X. Fiber adapter port. Fiber port supports standard SFP
External AC Adapter/ChargerAC input 90-264 Vac 48-62 Hz input power DC output 15 Vdc at 2 amps or RJ-45 via PoE
Environmental
Operating Temperature32°F to 113°F (0°C to +45°C) NOTE: The battery will not charge if the internal temperature of the tester is above 122°F (50°C)
Operating Relative Humidity (% RH without condensation)90% (50°F to 95°F; 10°C to 35°C); 75% (95°F to 113°F; 35°C to 45°C)
Shock and Vibrations1 m drop test, Random, 3.8 grms, 5 Hz-500 Hz (Class 2)
SafetyIEC 61010-1:2010: Pollution degree 2
Altitude4,000 m; Storage: 12,000 m
EMCIEC 61326-1:2013: Basic Electromagnetic Environment; CISPR 11: Group 1, Class A
Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself.
Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purposes. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances.
You've just added this product to the cart: