Fluke 710 mA Loop Valve Tester
- Key valve testing functions include pre-configured valve signature test, speed test, step test, manual test, and bump/partial stroke test
- Key mA loop calibrator functions include mA source, mA simulate, mA read, mA read/loop power, and volts read
- ValveTrack™ Software enables upload to a PC for further in-depth analysis of valve measurements that are logged and recorded to memory
- Description
- Additional information
- Specifications
Description
The Fluke 710 is a mA Loop Valve Tester specifically designed to quickly and easily test HART smart control valves.
Key Features:
- HART Communication: The 710 incorporates HART communication capabilities, allowing it to interact with smart control valves and extract valuable diagnostic information.
- Built-in Test Procedures: It features pre-programmed test procedures for common valve tests, such as valve signature tests, speed tests, and step tests. This simplifies the testing process and reduces the need for extensive manual configuration.
- Intuitive User Interface: The 710 has an easy-to-use interface with a clear display, making it simple for technicians to operate and interpret the test results.
- Valve Health Assessment: The 710 provides quick-check results, allowing technicians to quickly assess the overall health of the valve (good, marginal, or bad). This helps prioritize maintenance and prevent costly downtime.
- Data Logging: The 710 can log test data, allowing for further analysis and documentation of valve performance.
Applications:
- Predictive Maintenance: The 710 helps identify potential valve issues before they lead to costly equipment failures, enabling proactive maintenance and reducing downtime.
- Process Optimization: By ensuring optimal valve performance, the 710 contributes to improved process efficiency and reduced operating costs.
- Safety and Reliability: Identifying and addressing valve issues helps to improve the safety and reliability of industrial processes.
The Fluke 710 is a valuable tool for maintenance technicians and engineers who need to quickly and efficiently test and diagnose the health of HART smart control valves. Its built-in test procedures, user-friendly interface, and diagnostic capabilities make it a powerful tool for improving process efficiency and reducing maintenance costs.
Additional information
| Brand | Fluke Calibration |
|---|
Specifications: Fluke 710 mA Loop Valve Tester
| Detailed Specifications | |
| Functions | mA source, mA simulate, mA read, mA read/loop power, and volts read. |
| Ranges | mA (0 to 24 mA) and Volts (0 to 30 V DC) |
| Resolution | 1 µA on mA ranges and 1 mV on voltage range |
| Accuracy | 0.01% ± 2 counts, all ranges (@ 23 °C ± 5 °C [73.4 °F ± 41 °F]) |
| Operating temperature range | -10°C to 55°C (14°F to 131°F) |
| Humidity range | 10 to 95% non-condensing |
| Stability | 20 ppm of F.S. /°C from -10°C to 18°C and 28°C to 55°C |
| Display | 128 x 64 pixels, LCD Graphic w/backlight, .34 high digits |
| Power | 6 AAA alkaline |
| Battery life | 40 hours continuous use (measure mode using) |
| Loop compliance voltage | 24 V DC @ 20mA |
| Over-voltage protection | 240 V AC |
| Overload current protection | 28 mA DC |
| EMC | EN61326 Annex A (Portable Instruments) |
| Dimensions (L x W x D) | 15 x 9 x 3 cm (6 x 3.6 x 1.3 in) |
| Weight | 0.3 kg (9.5 oz) |
| Included accessories | Traceable calibration certificate with data, batteries, test leads, USB upload cable and safety |
