Fluke 1663 Installation Multifunction Tester

Comprehensive Testing Capabilities:

Voltage and frequency measurement
Resistance measurement
Continuity testing
Earth resistance measurement
Loop impedance testing
RCD testing (including Type B RCDs)
Insulation resistance testing
Polarity testing
Phase rotation testing

Description
Additional information
Specifications
Models

Description

The Fluke 1663 Multifunction Installation Tester is a powerful tool designed to streamline and enhance the efficiency of electrical installations. This versatile device offers a comprehensive suite of testing capabilities, ensuring the safety and compliance of electrical systems in various settings.

Key Features:

Comprehensive Testing Capabilities: The 1663 covers a wide range of essential tests, including:

Voltage and frequency measurement
Resistance measurement
Continuity testing
Earth resistance measurement
Loop impedance testing
RCD testing (including sensitive Type B RCDs)
Insulation resistance testing
Polarity testing
Phase rotation testing

Applications:

Electrical Installations: Verifying the safety and compliance of new installations.
Periodic Inspections: Conducting routine inspections to identify potential hazards and ensure ongoing safety.
Fault Finding: Diagnosing electrical faults and troubleshooting issues.
Maintenance and Repair: Supporting maintenance and repair activities.

Benefits:

Enhanced Safety: By ensuring the correct functioning of electrical systems, the 1663 helps prevent accidents and electrical shocks.
Increased Efficiency: Automated tests and streamlined workflows improve productivity.
Accurate and Reliable Results: Precise measurements and advanced features ensure accurate and reliable test results.
Compliance with Standards: The 1663 helps users comply with relevant electrical safety standards and regulations.

Overall, the Fluke 1663 is a valuable tool for electrical professionals, providing a comprehensive solution for testing, troubleshooting, and maintaining electrical installations. Its advanced features, user-friendly interface, and robust design make it an essential tool for ensuring safety and efficiency in the electrical industry.

Additional information

Brand	Fluke

Specifications: Fluke 1663 Installation Multifunction Tester

Specifications: Fluke 1663 and 1664 FC Installation Multifunction Testers

AC voltage measurement
Range	500 V
Resolution	0.1 V
Accuracy 45 Hz – 66 Hz	0.8% + 3
Input impedance	360 kΩ
Overload protection	660 V rms
Continuity testing (RLO)
Range (autoranging)	20 Ω / 200 Ω / 2000 Ω
Resolution	0.01 Ω / 0.1 Ω / 1 Ω
Open Circuit Voltage	>4 V
Insulation resistance measurement (RISO)
Test voltages	50-100-250-500-1000 V
Accuracy of test voltage (at rated test current)	+10%, -0%
Test voltage	50 V 100 V 250 V 500 V 1000 V
Insulation resistance range	20 MΩ / 50 MΩ 20 MΩ / 100 MΩ 20 MΩ / 200 MΩ 20 MΩ / 200 MΩ / 500 MΩ 20 MΩ / 200 MΩ / 1000 MΩ
Resolution	0.01 MΩ / 0.1 MΩ 0.01 MΩ / 0.1 MΩ 0.01 MΩ / 0.1 MΩ 0.01 MΩ / 0.1 MΩ / 1 MΩ 0.01 MΩ / 0.1 MΩ / 1 MΩ
Test current	1 mA @ 50 kΩ 1 mA @ 100 kΩ 1 mA @ 250 kΩ 1 mA @ 500 kΩ 1 mA @ 1 MΩ
Loop and line impedance (ZI)
Range	10 Ω (Hi current mΩ mode)/20 Ω/200 Ω/2000 Ω
Resolution	0.001 Ω/ 0.01 Ω/ 0.1 Ω/1 Ω
Prospective earth fault current, PSC test
Range	1000 A / 10 kA (50 kA)
Resolution	1 A / 0.1 kA
Computation	Prospective earth fault current (PEFC) or Prospective short circuit current (PSC) determined by dividing measured mains voltage by measured loop (L-PE) resistance or line (L-N) resistance, respectively.
RCD testing, RCD types tested
RCD Type	AC¹ G²,S³
Model 1663	A4, AC¹, G²,S³
Model 1664 FC	A, AC, B5, S
Notes	¹Responds to AC ²General, no delay ³Time delay ⁴Responds to pulsed signal ⁵Responds to smooth DC signal
Tripping speed test (ΔT)
Current settings¹	10-30-100-300-500-1000 mA – VAR 10-30-100 mA
Multiplier	x ½, x 1 x 5 VAR Mode Type B – 6, 60, 200 mA
Measurement range	RCD Type G	310 ms 50 ms
	RCD Type S	510 ms 160 ms
	EV / RDC-DD	6 mA – 10s 60 mA – 0.3s 200 mA – 0.1s
Notes	¹1000 mA type AC only 700 mA maximum type A in VAR mode The VAR Mode at RCD type B (smooth DC currents) generates the test currents acc. to IEC 62955 for RCD type A-EV or RDC-DD (6/60/200 mA and ramp <2 to 6 mA).
RCD/FI-Tripping Current Measurement/Ramp Test (IΔN)
Current range	30% to 110% of RCD rated current¹ <2 mA to 6 mA smooth DC³
Step size	10% of IΔN² Linear rising within 30 s
Dwell time	RCD Type G	300 ms/step
	RCD Type S	500 ms/step
Measurement accuracy	±5%
Specified trip current ranges (EN 61008-1)	50% to 100% for Type AC 35% to 140% for Type A (>10 mA) 35% to 200% for Type A (≤10 mA) 50% to 200% for Type B
Notes	¹30% to 150% for Type A IΔN > 10 mA 30% to 210% for Type A IΔN = 10 mA 20% to 210% for Type B ²5% for Type B ³For RCD type A-EV/RDC-DD acc. to IEC 62955
Earth Resistance Test (RE)
Range	200 Ω / 2000 Ω
Resolution	0.1 Ω / 1Ω
Frequency	128 Hz
Output Voltage	25 V
Phase Sequence Indication
Icon	Phase Sequence indicator is active.
General Specifications
Size (L x W x H)	10 x 25 x 12.5 cm
Weight (incl. batteries)	1.3 Kg
Battery size, quantity	Type AA, 6 ea.
Sealing	IP-40
Safety	Complies with EN/IEC 61010-1 and EN/IEC 61010-2-034
Overvoltage	CAT III / 500V; CAT IV 300V
Performance	EN61557-1 to EN61557-7 and EN61557-10