Additel ADT912A Low Pressure Test Pump
- Great stability and high resolution
- Minimal maintenance
- Hand-tight quick connectors
More information contact below :
The 912A Pneumatic Pressure Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 60psi (4bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to 0.1 Pa (0.001 mbar). The 912A is a very stable low pressure calibrator. It makes use of an isothermal bellows chamber which is designed for reducing the possible effects of environmental temperature change.
Most pumps make use of a check valve (non-returning valve) and are not well insulated which will cause large fluctuations in pressure with a change in ambient temperature or when the unit is touched. The 912A does not use a check valve and is remarkably stable. Two hand-tight connectors installed on the pump allow easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches. The 912A is an ideal comparison test pump for low pressure application.
The Additel 912A Low Pressure Test Pump is designed to generate pressure from 95% vacuum to 60 psi (4 bar) for the application requiring accurate pressure testing and calibration. It can be used in calibrating pressure gauges, transmitters, or other pressure measuring instruments.
- Generated Pressure Range
95% vacuum to 60 psi (4 bar) positive pressure
- Adjustment Resolution
0.1 Pa (0.001 mbar).
Hand-tight connectors for both test gauge and reference gauge.
Test Gauge connection: 1/4NPT female, 1/4BSP female, or M20X1.5 female
Reference Gauge Connection: 1/4NPT female, 1/4BSP female, or M20X1.5 female
Height: 5.51″ (140 mm)
Base: 10.75″ (273 mm) x 10.16″ (258 mm)
6.2 lb (2.8 kg).